+ 91 - 77770 74941     info@elevateparking.co.in

Three Level Simple Stacker

This is Parking System offers parking for 3 cars; one on the ground and two on the two upper levels. The car on the ground level will need to be removed before lowering the first level platform; similarly the ground and first level cars will need to be removed before lowering the second level platform.

TYPE Three Level above Ground Stacker
MODELS E3SS/E3SM/E3SB
NO. OF CAR PER UNIT 3 Cars
LIFTING CAPACITY 2000 Kg [ Per Car Weight]
LIFTING TIME 2 m/min each stack
OPERATION Hydraulic Power Pack, One/Two Cylinder with Key/Push button operation.
POWER SUPPLY 415 V, 3 phase, 50 Hz
POWER CONSUMPTION Up to 0.04 units per stack operation (approx).

Specification Table:

 

MODEL SYSTEM
WIDTH (MM)		 PLATFORM
WIDTH (MM)		 PLATFORM
LENGTH (MM)		 LOWER CAR
HEIGHT(MAX)		 LIFTING
MECHANISM		 CAR
CATEGORY
E3SS 2300 X 4500 Level 2 ÔÇô 1700
Level 1 ÔÇô 1900
Gr.level ÔÇô2000		 Level 2 ÔÇô 3700
Level 1 ÔÇô 4000		 ALL LEVEL
MAX ÔÇô 2100		 Hydraulic /
Motorized		 Small Cars
E3SM 2500 x 5500 Level 2 ÔÇô 1900
Level 1 ÔÇô 2100
Gr.level ÔÇô2200		 Level 2 ÔÇô 4000
Level 1 ÔÇô 4500		 ALL LEVEL
MAX – 2100		 Hydraulic /
Motorized		 Small Cars/
Mid Sized Sedans
E3SB 2700 x 5500 Level 2 ÔÇô 2000
Level 1 ÔÇô 2200
Gr.level ÔÇô2400		 Level 2 ÔÇô 4000
Level 1 ÔÇô 4500		 ALL LEVEL
MAX – 2100		 Hydraulic /
Motorized		 Mid Sized Sedan/
Small Cars/
Large Sedans/
SUVÔÇÖs

Standard Features:

 

  • Fast and automatic retrieval of cars from the parking Space without removing any cars parked on the ground level of the system.
  • One Slot left empty at each level to make way for the upper platform to pass through.
  • Hot dipped Galvanized Corrugated floor plates to reduce dead weight and increase durability.
  • Geared motor with minimum Safety factor of 2 with manual brake release.
  • Motor- Chain operated Sliding Mechanism.
  • Single Power Pack per system to reduce cost in case of hydraulic puzzle
  • Complete system monitored by PLC for smooth and error free automation.
  • Back up Limit switches provided for each slot for duplex safety.
  • Fabricated barriers provided on each platform to provide safety against unwanted lowering.
  • Fully automatic integrated operation.
  • Emergency Shut Down switch.
  • Optional Touch Screen/Numerical Keyboard operation Panel.

Requirements from Client:

 

  • Parking area allotted must be cleared with no obstructions.
  • While erection of the system client should provide storage facilities for keeping our tools and other valuable parts of the system
  • Temporary Electrical connection must be provided at the time of erection and installation of the systems.
  • MCB and Main Electrical Connection (or 4 Pole RCBO) along with electrical cable fitting must be provided from the Main Power supply to the parking systems. With 3Ph 415V AC, 50Hz with Neutral and Earth(3Ph+N+E) as per our specifications.
  • Civil work as foundation for parking system must be done at stack parking allotted area prior to installation as per the foundation plan submitted by us.
  • Base area of the parking space allotted shall be Concrete with minimum strength of M20.
  • In case of Parking Installed in open to Sky location, it is recommended to have a weather covering over the installation to prevent damage to the electronics / mechanism due to weathering.